Part Number Hot Search : 
ISL28207 MM3Z20 250VA CAT28 ACT510 STF715 BD241 05910
Product Description
Full Text Search
 

To Download TL08207 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 TL082 TL082A - TL082B
General purpose J-FET dual operational amplifiers
Features

Wide common-mode (up to VCC+) and differential voltage range Low input bias and offset current Output short-circuit protection High input impedance J-FET input stage Internal frequency compensation Latch up free operation High slew rate: 16V/s (typ) D SO8 (Plastic micropackage) N DIP8 (Plastic package)
Description
The TL082, TL082A and TL082B are high speed J-FET input dual operational amplifiers incorporating well matched, high voltage J-FET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low input bias and offset current, and low offset voltage temperature coefficient.
P TSSOP8 (Thin shrink small outline package) Pin connections (top view)
1 2 3 4 + +
8 7 6 5
1 - Output 1 2 - Inverting input 1 3 - Non-inverting input 1 4 - VCC5 - Non-inverting input 2 6 - Inverting input 2 7 - Output 2 8 - VCC+
March 2007
Rev 9
1/17
www.st.com 17
Schematic diagram
TL082 -TL082A - TL082B
1
Schematic diagram
Figure 1. Schematic diagram
VCC
Non-inverting input Inverting input
1 0 0
2 0 0
Output
1 0 0 30k
1/2 TL082
8.2k
1.3k VCC
35k
1.3k
35k
1 0 0
2/17
TL082 -TL082A - TL082B
Absolute maximum ratings and operating conditions
2
Table 1.
Symbol VCC Vi Vid Ptot
Absolute maximum ratings and operating conditions
Absolute maximum ratings
Parameter Supply voltage (1) Input voltage
(2) (3)
TL082M, AM, BM
TL082I, AI, BI 18 15 30 680 125 85 120 40 41 37 Infinite -65 to +150 1 200 1500
TL082C, AC, BC
Unit V V V mW
Differential input voltage Power dissipation
Rthja
Thermal resistance junction to ambient(4) SO-8 DIP8 TSSOP8 Thermal resistance junction to case SO-8 DIP8 TSSOP8 Output short-circuit duration (5)
C/W
Rthjc
C/W
Tstg
Storage temperature range HBM: human body model(6)
(7)
C kV V V
ESD
MM: machine model
CDM: charged device model(8)
1. All voltage values, except differential voltage, are with respect to the zero reference level (ground) of the supply voltages where the zero reference level is the midpoint between VCC+ and VCC-. 2. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 volts, whichever is less. 3. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. 4. Short-circuits can cause excessive heating. Destructive dissipation can result from simultaneous short-circuit on all amplifiers. 5. The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure that the dissipation rating is not exceeded 6. Human body model: 100pF discharged through a 1.5k resistor between two pins of the device, done for all couples of pin combinations with other pins floating. 7. Machine model: a 200pF cap is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5), done for all couples of pin combinations with other pins floating. 8. Charged device model: all pins plus package are charged together to the specified voltage and then discharged directly to the ground.
Table 2.
Symbol VCC Toper
Operating conditions
Parameter Supply voltage Operating free-air temperature range -55 to +125 TL082M, AM, BM TL082I, AI, BI 6 to 36 -40 to +105 0 to +70 TL082C, AC, BC Unit V C
3/17
Electrical characteristics
TL082 -TL082A - TL082B
3
Table 3.
Symbol
Electrical characteristics
VCC = 15V, Tamb = +25C (unless otherwise specified)
Parameter TL082I,M,AC,AI,A M,BC,BI,BM Min. Input offset voltage (Rs = 50) TL082 Tamb = +25C TL082A TL082B Tmin Tamb TmaxTL082 TL082A TL082B Input offset voltage drift Input offset current Tamb = +25C Tmin Tamb Tmax Input bias current Tamb = +25C Tmin Tamb Tmax Large signal voltage gain (RL = 2k Vo = 10V) , Tamb = +25C Tmin Tamb Tmax Supply voltage rejection ratio (RS = 50) Tamb = +25C Tmin Tamb Tmax Supply current, no load Tamb = +25C Tmin Tamb Tmax Input common mode voltage range Common mode rejection ratio (RS = 50) Tamb = +25C Tmin Tamb Tmax Output short-circuit current Tamb = +25C Tmin Tamb Tmax Output voltage swing Tamb = +25C Tmin Tamb Tmax RL = 2k RL = 10k RL = 2k RL = 10k 11 50 25 80 80
(1)
TL082C Unit Min. Typ. Max.
Typ.
Max.
Vio
3 3 1
10 6 3 13 7 5
3
10 mV 13
DVio Iio
10 5 100 4 200 20 25 15 70 70 2.5 2.5 11
10 5 100 10 400 20
V/C pA nA pA nA V/mV
Iib
20
20
Avd
200
200
SVR
86
86
dB
ICC
1.4 +15 -12 86
1.4 +15 -12 86
2.5 2.5
mA
Vicm
V
CMR
80 80
70 70
dB
Ios
10 10 10 12 10 12 8
40
60 60
10 10 10 12 10 12 8
40
60 60
mA
Vopp
12 13.5
12 13.5
V
SR
Slew rate (Tamb = +25C) , Vin = 10V, RL = 2k CL = 100pF, unity gain
16
16
V/s
4/17
TL082 -TL082A - TL082B Table 3.
Symbol
Electrical characteristics
VCC = 15V, Tamb = +25C (unless otherwise specified) (continued)
Parameter TL082I,M,AC,AI,A M,BC,BI,BM Min. Typ. Max. Min. TL082C Unit Typ. Max. s % MHz %
nV ----------Hz
tr Kov GBP Ri THD en m Vo1/Vo2
Rise time (Tamb = +25C) , Vin = 20mV, RL = 2k CL = 100pF, unity gain Overshoot (Tamb = +25C) , Vin = 20mV, RL = 2k CL = 100pF, unity gain Gain bandwidth product (Tamb = +25C) , Vin = 10mV, RL = 2k CL = 100pF, f= 100kHz Input resistance Total harmonic distortion (Tamb = +25C), ,C f=1kHz, RL = 2k L =100pF, Av=20dB, Vo=2Vpp Equivalent input noise voltage RS = 100, f = 1KHz Phase margin Channel separation Av = 100 2.5
0.1 10 4 1012 0.01 15 45 120 2.5
0.1 10 4 1012 0.01 15 45 120
degrees dB
1. The input bias currents are junction leakage currents which approximately double for every 10C increase in the junction temperature.
5/17
Electrical characteristics
TL082 -TL082A - TL082B
Figure 2.
Maximum peak-to-peak output voltage versus frequency
Figure 3.
Maximum peak-to-peak output voltage versus frequency
Figure 4.
Maximum peak-to-peak output voltage versus load resistance
Figure 5.
Maximum peak-to-peak output voltage versus frequency
Figure 6.
Maximum peak-to-peak output Figure 7. voltage versus free air temperature
Maximum peak-to-peak output voltage versus supply voltage
MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE (V)
30 25
RL = 10 k Tamb = +25C
20
15 10
5
0 2 4 6 8 10 12 SUPPLY VOLTAGE ( V) 14 16
6/17
TL082 -TL082A - TL082B
Electrical characteristics
Figure 8.
Input bias current versus free air temperature
Figure 9.
Large signal differential voltage amplification and phase shift versus frequency
100 V CC = INPUT BIAS CURRENT (nA) 10 1 0.1 15V
DIFFERENTIAL VOLTAGE AMPLIFICATION (V/V) 100
PHASE SHIFT (right scale)
DIFFERENTIAL VOLTAGE AMPLIFICATION (left scale)
180
10
1 100
R = 2kW L C L = 100pF V CC = 15V T amb = +125C
1K 10K 100K 1M 10M FREQUENCY (Hz)
90
0
0.01 -50
-25
0
25
50
75
100
125
TEMPERATURE (C)
Figure 10. Supply current per amplifier versus Figure 11. Large signal differential voltage free air temperature amplification versus free air temp.
2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 -75 -50 -25 0 25 50 TEMPERATURE (C)
SUPPLY CURRENT (mA)
DIFFERENTIAL VOLTAGE AMPLIFICATION (V/V)
V CC = 15V No signal No load
1000 400 200 100 40 20 10 4 2 1 -75
V CC = 15V V O = 10V R L = 2k -50 -25 0 25 50 75 100 125
75
100
125
TEMPERATURE (C)
Figure 12. Total power dissipation versus free Figure 13. Supply current per amplifier versus air temperature supply voltage
2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0
TOTAL POWER DISSIPATION (mW)
250 225 200 175 150 125 100 75 50 25 0 -75 -50 -25 0 25 50 TEMPERATURE (C)
SUPPLY CURRENT (mA)
V CC = 15V No signal No load
Tamb = +25C No signal No load
75
100
125
2
4 6 10 12 14 8 SUPPLY VOLTAGE ( V)
16
7/17
Electrical characteristics
TL082 -TL082A - TL082B
Figure 14. Common mode rejection ratio versus free air temperature
Figure 15. Output voltage versus elapsed time
89 COMMON MODE MODE REJECTION RATIO (dB) 88 87 86 85 84 83 -75 -50 -25 0 25 50 75 100 125
28 OUTPUT VOLTAGE (mV)
R L = 10 k VC C = 15V
24
OVERSH OOT
20 16 12 8 4
10%
90%
V
CC
= 15V
0 -4 0
tr
0.1 0.2 0.3 0.4 TIME (s)
R L = 2k Tamb = +25C
0.5 0.6 0.7
TEMPERATURE (C)
Figure 16. Voltage follower large signal pulse response
INPUT AND OUTPUT VOLTAGES (V) 6 INPUT
Figure 17. Equivalent input noise voltage versus frequency
70 EQUIVALENT INPUT NOISE VOLTAGE (nV/VHz)
4 2 0 -2 -4 -6 0
OUTPUT
60 50 40 30 20 10 0 10 40 100 400 1k
VCC = 15V A V = 10 R S = 100 T amb = +25C
VCC= 15V R L = 2 kW
C L= 100pF Tamb = +25C
0.5
1
1.5
2
2.5
3
3.5
4k
10k
40k 100k
TIME (ms)
FREQUENCY (Hz)
Figure 18. Total harmonic distortion versus frequency
1 TOTAL HARMONIC DISTORTION (%) 0.4 0.1 0.04 0.01 0.004 0.001 100 400 1k 4k 10k 40k 100k FREQUENCY (Hz) V V = = 15V 15V CC CC 1 A A V= = 1 V V V O (rms) = 6V O (rms) = 6V T amb = = +25C T amb +25C
8/17
TL082 -TL082A - TL082B
Parameter measurement information
4
Parameter measurement information
Figure 19. Voltage follower
Figure 20. Gain-of-10 inverting amplifier
10k 1k
eI
-
1/2 TL082
eo
RL
CL = 100pF
9/17
Typical applications
TL082 -TL082A - TL082B
5
Typical applications
Figure 21. 100kHz quadruple oscillator
1N 4148 18k * -15V
18pF
18pF 1/2 TL082 88.4k
1k
88.4k
6 sin t 1/2 TL082 1k 6 cos t
18pF 88.4k
1N 4148
18k *
+15V
* These resistors values may be adjusted for a symmetrical output
10/17
TL082 -TL082A - TL082B
Package information
6
Package information
In order to meet environmental requirements, STMicroelectronics offers these devices in ECOPACK(R) packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an STMicroelectronics trademark. ECOPACK specifications are available at: www.st.com.
11/17
Package information
TL082 -TL082A - TL082B
6.1
8-pin plastic DIP package mechanical data
Dimensions Ref. Min. A A1 A2 b b2 c D E E1 e eA eB L 2.92 3.30 0.38 2.92 0.36 1.14 0.20 9.02 7.62 6.10 3.30 0.46 1.52 0.25 9.27 7.87 6.35 2.54 7.62 10.92 3.81 0.115 0.130 4.95 0.56 1.78 0.36 10.16 8.26 7.11 Millimeters Typ. Max. 5.33 0.015 0.115 0.014 0.045 0.008 0.355 0.300 0.240 0.130 0.018 0.060 0.010 0.365 0.310 0.250 0.100 0.300 0.430 0.150 0.195 0.022 0.070 0.014 0.400 0.325 0.280 Min. Inches Typ. Max. 0.210
12/17
TL082 -TL082A - TL082B
Package information
6.2
8-pin plastic micropackage (SO8) mechanical data
Dimensions Ref. Min. A A1 A2 b c D E E1 e h L k ccc 0.25 0.40 1 0.10 1.25 0.28 0.17 4.80 5.80 3.80 4.90 6.00 3.90 1.27 0.50 1.27 8 0.10 0.010 0.016 1 0.48 0.23 5.00 6.20 4.00 Millimeters Typ. Max. 1.75 0.25 0.004 0.049 0.011 0.007 0.189 0.228 0.150 0.193 0.236 0.154 0.050 0.020 0.050 8 0.004 0.019 0.010 0.197 0.244 0.157 Min. Inches Typ. Max. 0.069 0.010
13/17
Package information
TL082 -TL082A - TL082B
6.3
8-pin TSSOP (thin shrink small outline package) mechanical data
Dimensions Ref. Min. A A1 A2 b c D E E1 e k L L1 aaa 0 0.45 0.60 1 0.1 0.05 0.80 0.19 0.09 2.90 6.20 4.30 3.00 6.40 4.40 0.65 8 0.75 0 0.018 0.024 0.039 0.004 1.00 Millimeters Typ. Max. 1.2 0.15 1.05 0.30 0.20 3.10 6.60 4.50 0.002 0.031 0.007 0.004 0.114 0.244 0.169 0.118 0.252 0.173 0.0256 8 0.030 0.039 Min. Inches Typ. Max. 0.047 0.006 0.041 0.012 0.008 0.122 0.260 0.177
14/17
TL082 -TL082A - TL082B
Ordering information
7
Table 4.
Ordering information
Order codes
Temperature range Package DIP8 SO8 TSSOP8 DIP8 -55C, + 125C SO8 TSSOP8 DIP8 SO8 TSSOP8 DIP8 SO8 TSSOP8 DIP8 -40C, +105C SO8 TSSOP8 DIP8 SO8 TSSOP8 DIP8 SO8 TSSOP8 DIP8 0C, +70C SO8 TSSOP8 DIP8 SO8 TSSOP8 SO8 (automotive grade level) Packing Tube Tube or tape & reel 082M Tape & reel Tube Tube or tape & reel 082AM Tape & reel Tube Tube or tape & reel 082BM Tape & reel Tube Tube or tape & reel 082I Tape & reel Tube Tube or tape & reel 082AI Tape & reel Tube Tube or tape & reel 082BI Tape & reel Tube Tube or tape & reel 082C Tape & reel Tube Tube or tape & reel 082AC Tape & reel Tube Tube or tape & reel 082BC Tape & reel 082IY -40C, +105C Tube or tape & reel 82AIY 82BIY TL082BCN TL082ACN TL082CN TL082BIN TL082AIN TL082IN TL082BMN TL082AMN Marking TL082MN
Part number TL082MN TL082MD/MDT TL082MPT TL082AMN TL082AMD/AMDT TL082AMPT TL082BMN TL082BMD/BMDT TL082BMPT TL082IN TL082ID/IDT TL082IPT TL082AIN TL082AID/AIDT TL082AIPT TL082BIN TL082BID/BIDT TL082BIPT TL082CN TL082CD/CDT TL082CPT TL082ACN TL082ACD/ACDT TL082ACPT TL082BCN TL082BCD/BCDT TL082BCPT TL082IYDT(1) TL082AIYDT(1) TL082BIYDT
(1)
1. Qualified and characterized according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001 & Q 002 or equivalent.
15/17
Revision history
TL082 -TL082A - TL082B
8
Revision history
Date 2-Apr-2001 2002-2003 30-Apr-2004 Revision 1 2-7 8 Initial release. Internal revisions. Format update. Added ESD information in Table 1 on page 3. Expanded order codes table and added automotive grade order codes. See Table 4 on page 15. Added Table 2: Operating conditions on page 3. Updated package information to make it compliant with the latest JEDEC standards. Changes
6-Mar-2007
9
16/17
TL082 -TL082A - TL082B
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
17/17


▲Up To Search▲   

 
Price & Availability of TL08207

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X